KUBE PUMPS WATER-PUMPS, MOTOR-PUMPS, PORTABLE-PUMPS

The Kube pumps can operate in almost any environmental situation. They can work without problems and permanently in dirty water, flood water, oily water, sewage and sea water. However, the main feature is that the pump works without primer and without vacuum. It can therefore run dry, sucking water extremely fast and up to 10 meters high. The pump systems are extremely simple and easy to use, and on the other hand, they are among the lightest 4-stroke units on the market.

WHY KUBE-PUMPS?

You can get all the essential information at a glance in our new presentation. And if you still have a question or would like a trial, just give us a call…

DIE PRODUKTVORTEILE

In addition to firefighting in buildings and forest firefighting scenarios, KUBE pumps can be used to pump heavily polluted water, flood water, oily water, sewage and even seawater.

Unique protection systems of the KUBE pump and the type of construction prevent even larger impurities from damaging the pump and the motor.

The operating principle of the KUBE pump is not based on vacuum. A propeller mounted on a flexible shaft pushes the water up to 10 meters to the pump. With these features, it differs from other known pumps in terms of performance and efficiency.

Since the KUBE pump does not require a mechanical seal, dry running will not cause damage to the pump or motor.

KUBE products are built for use in the toughest conditions on site. Despite the lightness of the devices, no compromises are made on the solid construction. The devices are suitable for many years of use under the toughest conditions.

KUBE pump systems are among the lightest systems in their performance class on the market. This is achieved by the special design features of the pump.

Every minute counts at the scene of an emergency. Equipment that optimally supports a successful operation must therefore be ready for use quickly. The concentration should be on the operation and the operation tactics and not on setting up the equipment. KUBE pumps are built in such a way that anyone can use them quickly at the scene of operation, even without explanation. 

Set it down, start the KUBE pump and pay full attention to the job site. The operability of the equipment must not be a mystery. Electronic “gimmicks” are of little use, because the concentration should be on the operation and the operation tactics, not on operating the equipment. Even without technical training, the equipment must be easy to operate. 

KUBE water pumps and motor pumps are designed for low operating costs. On the one hand, the units offer very high mechanical quality combined with very long service life even in tough applications. Spare parts availability and corresponding warranty plans further reduce operating costs.

KUBE - THE PUMP WITHOUT VACUUM

The KUBE water pumps resp. motor pumps can be operated in almost any environmental situation. They can work without problems and permanently in dirty water, flood water, oily water, sewage and seawater. This means that they can be used in conditions where other devices already have to give up.

The most important feature is that the pump works without primer and without vacuum. It can therefore run dry, sucking water extremely quickly and up to 10 meters high. All in all, the pump requires very little attention from emergency personnel and can be operated even by people who do not have a firefighting background.

In addition, the pump systems are extremely easy and user-friendly to operate and, on the other hand, they are among the lightest 4-stroke units on the market.

KUBE pumps can be easily maintained and repaired in a simple way due to their well thought-out and clear design. Spare parts can also be easily changed by in-house mechanics after a short instruction.

Couplings and connections of the KUBE pumps can be easily changed and adapted to the respective country standards, conditions or requirements of the application due to their modular design.

KUBE P2 – GASOLINE ENGINE PUMP
KUBE pump model P2 gasoline is characterized by the fact that at a comparatively low engine power, it has one of the highest pumping capacities in its class. The performance values in this weight class are extraordinary. It is used for medium and heavy pumping jobs.

KUBE pumps are certified according to TS EN 14466 and ISO 9001.

KUBE P1 – GASOLINE MOTOR PUMP
KUBE pump model P1 gasoline is one of the lightest pumps in this power class on the market and is used for light and medium pumping work and operations.All KUBE pumps are driven by a highquality VANGUARD motor

KUBE pumps are certified according to TS EN 14466 and ISO 9001.

KUBE P1 – DIESEL ENGINE PUMP
KUBE pump model P1 Diesel is often used by armed forces and has a corresponding NATO number. It is suitable for work in hazardous areas, has high torque and is fuel efficient. It is used for light to medium pumping work.

KUBE pumps are certified according to TS EN 14466 and ISO 9001. NATO Stock No.: 4320-270694208

RANGE OF APPLICATIONS

In addition to firefighting scenarios in buildings and forest firefighting, Kube Pumps can be used to pump heavily polluted water, flood water, oily water, waste water, and even seawater.

DIRT-WATER RESISTANT

Unique protection systems and the type of construction prevent even larger impurities from damaging the Kube Pump and motor.

KUBE P2 – Mobile Motorpump, Waterpump 

WORKS WITHOUT VACUUM

The operating principle of the Kube Pump is not based on vacuum. A propeller mounted on a flexible shaft pushes the water up to 10 meters high to the pump. With these features, it differs from other known pumps in terms of performance and efficiency.

WORKS WITHOUT PRIMER

Since the Kube Pump does not require a mechanical seal, dry running will not cause damage to the pump or motor.

WERDE VOGT-CTE RESCUE-TECHNOLOGY PARTNER FÜR KUBE PUMPENSYSTEME